Page 96 - EQUIPTO 2019 Catalog
P. 96

   Height Gate Gen IV Gen II Width Part No. Part No.
  9510
7720
   A. B. C.
D. E. F.
G.
H. I.
Configuration 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’
  Shipping
Description Weight (lbs.) Part No.
 6460
             92
3rd - Add Railings and Drop Gates
Generation IV Railing and Kick Plate
Rail posts are side-mounted to the platform beams and are available in 2-rail
and 3-rail sections of 2’, 4’, 5’, 6’ & 8’.
Generation II Railing and Kick Plate
Rail posts (3” x 3”) mount to the platform decking surface. Individual rail channels and kick plates are available in lengths of 30”, 42”, 45”, 57”, 69”, 72”, 90” & 93”.
(these measurements do not include the posts).
Accessories
Extension posts and stacking brackets
Drop gates
Pivots upward - no floor space needed to operate gate.
Slotted Angle
Optional extension posts
Optional Extension Posts (Part No. 9510) permit adjustment of platforms in 2” increments up to 2 feet higher than standard to accommodate tall machines, additional Equipto products, or a sloping floor.
Order with original Platform to ensure that proper posts without footplates are provided. Four required for each Platform module.
Equipto Slotted Angle is the frontrunner in creating steel framing systems. Visualize it, cut it, then bolt it. Build structures to do exactly what you want them to do, with almost no limit to the number of ways it can be assembled.
Capacity (lbs.) per beam length
42” 44”
42” 68”
42” 88”
Note: Gate 78138G is made up of two 44” frames.
One opens to each side.
Drop gate requires clearance on one or both sides equal to the gates width.
Platform stacking bracket
Brackets (4 required) fasten upper and lower posts to permit double-decking of same-size platforms.
Part No. 7720 - 4” x 4” x 3”H
Slotted Angle
Equipto Slotted Angle is the fro Visualize it, cut it, then bolt it. B them to do, with almost no limi
Horizonntatal Cl acpaapcaitcieitsies A.
A.
C.
D.
D.
E.
E.
F.
F.
G.
G.
H.
78134G 78136G 78138G
78134
78136
78138
  Single Pieces 1139 Short Legs Down
Single Pieces 3547 Long Legs Up
Single Pieces 3547 Long Legs Down
Narrow 6385 Channels
T-Beams 7094
759 569 455
1576 886 568
2365 1771 1327
4256 3192 2553
4729 3547 2837 6945 5208 4167
6945 5208 4167
10097 7572 6058 13890 10416 8334
379 325 284 253 227
396 289 222 175 — B.
Broad Channels
Broad Channels with Stiffeners
J-Beams I-Beams
10417 10417
15145 20835
2129 1824 1598 1418
2365 2026 1775 1576 3388 2617 2002 1489
3472 2976 2604 2315
5048 4326 3785 3366 6945 5952 5208 4629
1277
1418 1087
2092
2831 4166
Note: Capacities in the Table above are for angle used as horizontal beams, in lbs. of distributed load. For load concentrated in center of beam, reduce capacity by 50%. Capacities are per pair of beams; All figures are in lbs. of steady load, with a safety factor of 1.67. For shock or lateral thrust, add braces as needed. Where shown, connecting stiffeners should not be spaced over 3 ft. apart. I-beams and other multiple angles should be bolted together every 12’’.
Corner gusset
when used as corner brace, this
2’’ x 77/8” gusset adds strength and
rigidity to slotted angle units.
H.
Bundle of 10
super duty angles 175 5712-10 11/2’’ x 3’’c x 12 gauge
I.
(.104’’), 12’ long
Galvanized
1014 777 587 427 312
B. C.
A standard color chart is available on page 146.
I.
Platforms & Mezzanines
   94   95   96   97   98