Page 83 - EQUIPTO 2019 Catalog
P. 83

           Select your Drive Panel - cont’d
  Fixed Drive Panel
Steel or Laminate
Available widths:
12”, 15”, 18”, 24”, 30”, 36”, 48” Height:
Steel: 60”, 78”, 85”, 90”, 97” Laminate: 78”, 85”, 90”
Drive Shaft End Covers
Available Widths:
Approx. Height: 41/2”
Manual Drive Panel
Steel or Laminate Available widths: 18”, 24”, 30”, 36”, 48” Height:
Steel: 78”, 85”, 90” Laminate: 78”, 85”, 90”
Width
Cover shown in grey for detail purposes. Actual part is black.
Deck Skirting
Available Length: 6’
Note: Deck skirt covers the exposed areas at the end of the track. The skirts attach to the decking and are manufactured in 6ft. sections. The last section is cut to length in the field to match installation requirements.
Locking Options
3 options:
Normal or Keyed Alike
Track Base Lock - Keyed lock located on the carriage base, locking into the track. This is the only lock that can be used on manual carriages.
MOBLOCK - Keyed panel lock to secure carriage.
Available upon request. Typically used in last carriage.
Users can collapse the system, lock the last carriage, and the entire system is secured (must use closed-style shelving). Ideal for high-security items.
Panel Lock - Safety Feature used to lock
hand wheel before entering an aisle.
Included with each mechanical drive panel (Not Keyed).
Panel lock shown in photo to the left.
        12”, 15”, 18”, 24”, 30”, 36”, 48”, 60”
Note: Finished End Covers are an inexpensive option to add-on to the end of the carriage to cover mechanical components (drive shaft) extending beyond carriage. This part can be used in place of an end panel but WILL NOT cover the shelving ends. *Available for Fixed Carriages or opposite end of Manual or Mechanical apps.
Mobile Aisle Systems - Accessories
Anti Tip Brackets
Available Widths:
18”, 24”, 30”, 36”, 48”, 60”
Use this guideline to determine if anti-tip brackets are required:
18” wide carriage - use if shelving height is over 48” 24” wide carriage - use if shelving height is over 72” 30” wide carriage - use if shelving height is over 96” 36” wide carriage - use if shelving height is over 120” 48” wide carriage - use if shelving height is over 168”
Use the following guideline to determine the quantity of anti-tip brackets needed:
One Required per Mechanical / Manual carriage 3’-6’ in length Two Required per Mechanical / Manual carriage 7’-24’ in length Three Required per Mechanical / Manual carriage 25’-36’ in length
Raised Foot Brackets
For fixed carriages located on the floor. Raised Foot Bracket - Order 2 per track. Hardware for Brackets - Order 2 per bracket.
Sprocket Options
Heavy load sprocket option Fast travel sprocket option Bumper extensions
  79
Mobile Aisles























































   81   82   83   84   85