Page 27 - EQUIPTO 2019 Catalog
P. 27

            60” Wide V-GripTM Bulk Rack Drawers
30”D x 60”W x 84”H with 3 Levels (solid steel decking), Closed Ends/Backs
1. Shelving unit components
  StarterUnit-4200BHS Includes
QTY Part # Description
 4 5007
4 810530
2 810460-1
6 9435
3 16355
3 13114
3 6525
2 190319A
2 190320A
2 5007
2 810530
2 810460-1
6 9435
3 16355
3 13114
3 6525
2 190317A
1 831515-2
2.
84” V-Grip Upright
30”x42-3/4” End Panel
60” x 42” Flat Back Panel
60” Light Duty Beam
30”Dx60”W Solid Decking Level
Tek Screw
30” Tie Bar
LH Seismic Anchor
RH Seismic Anchor
84” V-Grip Upright
30”x42-3/4” End Panel
60” x 42” Flat Back Panel
60” Light Duty Beam
30”Dx60”W Solid Decking Level
Tek Screw
30” Tie Bar
Center Seismic Anchor
SATS Spacer Bar 5ft Pair
3”H Drawer (cannot be in top position)*
4.5”H Drawer
6”H Drawer
7.5”H Drawer
9”H Drawer
10.5”H Drawer
12”H Drawer
13.5”H Drawer
There are 3 restrictions that will have to be followed when placing these drawer bodies in the bulk rack unit. One, to minimize the gap between the top of the drawer front and the bottom of the beam, a 4-1/2” or larger drawer must be placed at the top position. Two, the light duty beams must be used in the 60” drawer in shelving applications. This is due to the height of the beam. Three, spacer beams are required; they will go in between the drawer configuration located approximately 36” from the bottom. #831515-2 comes in pairs assembled like the beams - one in front and one in back. You only need one pair per unit.
    1 831515-2 SATS Spacer Bar 5ft Pair
  Add-onUnit-4200BHA Includes
QTY Part # Description
   Partitions
Full width partitions
    2”
3”
41/2”
3”
41/2”
6” & up
Dividers
3 3/32’’ (4 spaces)
411/16” (6 spaces)
6 9/32” (8 spaces)
7 7/8” (10 spaces)
9 7/16” (12 spaces)
12 11/16” (16 spaces)
8726
8727
8728
2”
3”
41/2”
3”
41/2”
6” & up
8844
8845
8846
8847
8848
8849
60”
60”
60”
8736
8737
8738
   60”W Drawers 400 lb. Capacity
PART NUMBER DESCRIPTION
 8653-10S
8654-15S
8655-20S
8656-25S
8657-30S
8658-35S
8659-40S
8660-45S
8834
8835
8836
8837
8838
8839
8854
8855
8856
8857
8858
8859
       *To minimize gap beneath beam as designated above.
The drawer is the same 60”-wide drawer that is used in our modular cabinets. Only 400 lb. capacity is available.
Label Holder for individual dividers Part No. 6609
 3. Select divider sets for each drawer
that will help you maximize your storage space within each drawer. Divider Sets are optional, and are not required to order a cabinet. All dividers are smooth office gray in color.
   Divider kits - 60’’ wide
CDE
FH
Type C
Type D
Type E
Type F
Type H
4153C10 4154C15
4153D10 4154D15
4153E10 4154E15
4153F10 4154F15
4153H10 4154H15
4155C20
4155D20
4155E20
4155F20
4155H20
Partition To fit To fit 273/4” Height Drawer Height Deep Drawers
Partition To fit To fit Part No. Height Drawer Height Cabinet Width
 For 3” For 41/2” For 6” High and Width High Drawers High Drawers Larger Drawers
 Divider For 3” High For 41/2” For 6” High Set Drawer High Drawer and Up Drawer
    A standard color chart is available on page 146.
23
Shelving & Racks
   25   26   27   28   29