Page 21 - EQUIPTO 2019 Catalog
P. 21

              NEW!
We have developed a Parachute Storage Bar for V-GripTM Shelving in numerous configurations.
NEW!
Louver Rails for V-GripTM Shelving
  Part Number
20113
20114
Description
3ft Louvered rail
4ft Louvered rail
Capacity
180lb
150lb
8 10 6 8
    Part Number
Description
3ft Bar w/ 3 18" Hangers
4ft Bar w/ 4 18" Hangers
6ft Bar w/ 6 18" Hangers
Individual Bins
20053
20054
20056
050-0200Y 050-0230Y
5" x 4-1/8" x 3" 8lb capacity bin
10-4/8" x 5-1/2" x 5" 30lb capacity bin
Part Number Description # of Bins to fil Rail 3ft 4ft
  20060 Extra 18" Parachute Hanger, 55lb capacity
 050-0220Y 7-3/8" x 4-1/8" x 3"
10lb capacity bin 8 10
 Part No. Depth Width Thickness Edge For V-Grip Sizes (some overhang front and back)
Bins on Rail
   4ft Bar w/ 4 Hangers
18" Parachute Hanger
 Uprights
36"H 5003 42"H 5035
End Brace Plates
18"D 6413 24"D 6414
Back Brace
36"W 6416
42"W 6417
Shelves
Depth Width Part
18" 36" 6231
18" 48" 6241
24" 36" 6232
24" 48" 6242
To fill in space between shelf and drawer use fillers 36"W 7702 or 48"W 7702-48.
050-0230Y 050-0220Y 050-0200Y
V-GripTM Workcenters
36"H units have 33" for drawers (2 shelves)
42"H units have 39" for drawers (2 shelves)
*Minimum 2 shelves – 1 at bottom & 1 in middle = 3" (if you add more, minus 1-1/2" for eachshelf out of the total height for drawers). *If you add a door kit you must deduct 1-1/2" from the total height for drawers and add (4) tek screws 13114. Also add 3" more (in addition to the 2" overhang) onto your top depth to account for the door frame.
Hardwood Tops
When selecting a top, remember your shelving is always 1-5/8" longer than your nominal size, so your top must also be longer than a standard size top in the catalog.
Back Panels
Depth Width Part
36" 35-1/4" 7588-36
36" 41-1/4" 810436-5
48" 35-1/4" 7589-36
48" 41-1/4" 810448-7
End Panels
9111517-001 20" 38"
9111516-001 20" 74"
9111514A001 26" 111"
9111539-002 24" 37-3/4"
9111626-002 24" 74"
9111601-002 36" 50"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Bullnose-Front
Bullnose-Front
Bullnose-Front
Square
Square
Square
18" x 37-5/8"
18" x 73-5/8" (2-36"W units)
24" x 109-7/8" (3-36"W units)
24" x 37-5/8"
24" x 73-5/8" (2-36"W units)
36" x 49-5/8"
         Depth Height Part
18" 35-1/4" 6797-36
   18" 41-1/4" 810518-4
To splice tops together use 51721S. You can also mix with these standard size All Square edge tops with your total run as long as 1 top is 1-5/8" longer.
24" 35-1/4" 6799-36
  24" 41-1/4" 810524-5
Brackets for Top Attachments
  Drawers at top
7643LK
7643RK
Part No.
9111576-002
Depth Width Thickness Edge
 NO drawers or
shelf at top 7692L 7692R
  Need 2L & 2R per starter, 1L & 1R per addon.
9111521A001 36" 72"
9111526-001 36" 108"
If a top is not available in the size you need, contact Purchasing or Wisconsin Bench to get a quote. Make sure you remember to add 1-5/8" or more onto your nominal total width and also if you want all square or bullnose on one side that will determine your depth — all square can be exact depth (some overhang is recommended), bullnose on one edge will require additional minimum of 1" added onto nominal to account for bullnose receding and exposing the top of the upright. If you have units back to back then you should add a minimum of 2" to the overall depth and remember to specify if you want all square or bullnose on two edges.
24" 72"
1-3/4" Square
1-3/4" Square
1-3/4" Square
17
Shelving & Racks
   19   20   21   22   23