Page 18 - EQUIPTO 2019 Catalog
P. 18

  For Drawer Divider 18’’ Deep 24’’ Deep Width Height Set Divider Kit Divider Kit
 3’’ E
3’’ H 41/2’’ E
41/2’’ H
6’’ and up E 6’’ and up H
Description Part No.
41/4” x 12” 8111 71/4” x 12” 8113 41/4” x 18” 8104 71/4” x 18” 8106 41/4” x 24” 8115 71/4” x 24” 8117
4176E10 4186E10 4176H10 4186H10 4177E15 4187E15 4177H15 4187H15 4178E20 4188E20 4178H20 4188H20
         Description
Top or Bottom Cap/Black
Part No.
10177B
    Description
41/2’’ x 12” 71/2’’ x 12” 101/2’’ x 12” 131/2’’ x 12” 161/2’’ x 12”
41/2’’x 18” 71/2’’ x 18” 101/2’’ x 18” 131/2’’ x 18” 161/2’’ x 18”
6” x 24”
9” x 24” 12” x 24” 15” x 24” 21” x 24” 24” x 24” 281/2’’ x 24” 48” x 24” 12” x 36”
Part No.
8018 8020 8022 8024 8026 8090 8095 8097 8099 8091 8119 8121 8123 8125 8129 810301 810324-1 810306-3 8134
3” 41/2”
8781N 8791N
      To Fit Partition Drawer
Height Height
To Fit 18” Deep Drawers
To Fit
24” Deep Drawers
                   6620
 For 3” Divider High
Width Spaces Drawers
For 41/2”
High For 6” High
Drawers Drawers and Up
     Description (H x W) Part No. 6615/6613
   11/8” x 46” Label Holder 6613
411/16” 7 7/8”
12 11/16”
6 10 16
8835 8845 8855 8837 8847 8857 8839 8849 8859
             18’’ Deep Preconfigured Divider kits for 48” wide drawers
    48’’
3’’ D
3’’ F 41/2’’ D
41/2’’ F
6’’ and up D 6’’ and up F
4176D10 4186D10 4176F10 4186F10 4177D15 4187D15 4177F15 4187F15 4178D20 4188D20 4178F20 4188F20
25 D 28 E 20 F 12 H
24’’ Deep
25 D 28 E 20 F 12 H
    14
Sliding dividers (H x D) 23/4” x 12” 8110 53/4” x 12” 8112 23/4” x 18” 8103 53/4” x 18” 8105 23/4” x 24” 8114 53/4” x 24” 8116
Full height shelf dividers
(H x D)
2” x 12”
6” x 12”
9” x 12”
12” x 12” 8023 15” x 12” 8025 2” x 18” 8093 6” x 18” 8094 9” x 18” 8096 12” x 18” 8098
Ribbed and slotted partitions fit easily into drawers, running the full depth of the drawer from front-to-back. Adjustable in 3/4” increments, they may be used alone, or with dividers. Metal screws are supplied for fastening to drawer bottoms.
8780N 8790N
Label holders
11/8” x 34” Label Holder 6615 1” x 6” Plastic (for wire only) 6620
221/2’’ x 24” 251/2’’ x 24” 371/2’’ x 24”
810306-2 810324 810324-2
Individual dividers
33/32’’ 4 8834 8844 8854 69/32” 8 8836 8846 8856 9 7/16” 12 8838 8848 8858
15” x 18”
18” x 18” 8092
To further expand the possibilities
in creating your own drawer design,
we offer a variety of individual dividers. Use them with front-to-back partitions to make compartments of all sizes. Spaces across drawers; each 3/4’’ wide
36” wide drawers — 40 spaces 48” wide drawers — 53 spaces
71/2’’ x 24”
101/2’’ x 24” 8122
131/2’’ x 24”
161/2’’ x 24” 8126
101/2’’ x 36” 8133
Speediclip
10226
(Speediclip holds shelf dividers to shelves above and below.)
Important ordering considerations:
• When selecting divider kits select the correct height of partitions and dividers for specific drawers being ordered
• All dividers are smooth office gray in color
Close the top of any V-Grip Bulk Rack upright. Easy to attach - simply tap its triangular base into the upright. May also be used as floor glide to protect all floors. Made of high-impact plastic, it will withstand any load within the capacity of the upright itself.
10177W
8049
8019
8021
Partitions
2” 3”
41/2” 6” and up
•
810313
8120
8124
Top/bottom cap
Top or Bottom Cap/White
8782N 8792N
All partitions are smooth office gray in color
• All dividers are smooth office gray in color A standard color chart is available on page 146.
Shelving & Racks
   16   17   18   19   20